Menu
Your Cart

Punch & Flare or Bead Tools

Punch and flare or bead a 1.0, 1.5, 2.0 or a 2.5 inch hole without a press.

Brand: Eastwood Model: 20530
Punch and flare a 1 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site. Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm)  stainless..
NZ$175.00
Brand: Eastwood Model: 20355
Punch and flare a 1.5 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm)  stainles..
NZ$149.00 NZ$175.00
Brand: Eastwood Model: 20531
Punch and flare a 2 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm)  stainless ..
NZ$175.00 NZ$199.00
Brand: Eastwood Model: 20356
Punch and Bead a 1.5 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm)  stainless..
NZ$229.00 NZ$287.50
Eastwood Dimple Die Flare 1/2 inch Eastwood Dimple Die Flare 1/2 inch
More Stock Soon
Brand: Eastwood Model: 21310
Create 1/2" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal that you d..
NZ$66.70
Brand: Eastwood Model: 21311
Create 1" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal that you des..
NZ$104.39
Brand: Eastwood Model: 21312
Create 1 1/2" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3.175 mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal tha..
NZ$133.40
Showing 1 to 7 of 7 (1 Pages)