• Eastwood Extreme Chassis Black Satin Quart

Extreme Chassis Black Satin has 3X the resins of traditional coatings, so it's tough enough for any undercar component

You've spent many hours prepping your frame and suspension parts; now top-coat it with a tough, OEM-matching, satin formula that provides extreme durability! 3 times more resins make it 3 times more durable than our original Chassis Black.

  • Improved resistance against corrosion, chips and scratches
  • Resists brake fluid, fuel and solvents
  • Matches OEM finish
  • Apply multiple coats without lifting

3 times more resins make it 3 times more durable than our original Chassis Black coating. This maximum-durability satin formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches. 

For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z; orquart can 11194ZP). For rusted metal, first prime with Eastwood Rust Encapsulator.

Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting. 

1. Surface must be clean and dry before painting. Use Eastwood’s PRE Painting Prep 
to remove residual grease and oil. Can be used on bare metal or over a primer. For 
increased durability, prime with Extreme Chassis Black® Primer Quart (11194ZP), wait 15 
minutes to 1 hour and topcoat with Extreme Chassis Black®.
Do not use over self-etching primers. Test for compatibility if not using over Extreme 
Chassis Black® Primer. For best results, use when can and room temperature are 
between 70° to 90° F at 50% or less humidity.
2. Stir for at least 1 minute before use.
3. For Spray-on Application: several light coats give a better fi nish than one heavy coat. 
Contents are thinned to sprayable consistency. If desired, further thin with Toluol or Xylol. 
Apply only enough paint to achieve full hiding. For faster cure, apply a maximum of 2 
coats primer and 2 coats Extreme Chassis Black®. Allow 24 hours between coats.
4. Finished article should be allowed to dry 48-72 hours before being handled.
CONTAINS: Stoddard Solvent 8052-41-3, Acetone 67-64-1, Xylene 1330-20-7, and 
Carbon Black 1333-86-4.
DANGER: FLAMMABLE LIQUID AND VAPOR. Keep away from heat, sparks and flames.  

Write a review

Please login or register to review

Eastwood Extreme Chassis Black Satin Quart

  • Brand: Eastwood
  • Product Code: 11176ZP
  • Availability: In Stock
  • NZ$99.95